10 Ways to Clean a Burnt Pan

Even at the most attentive housewife at least once in a life a pan burned. Throwing away good dishes in the trash is not an option, therefore, you need to look for another way. Fortunately, more than one method was invented for such a case. We will share with you the most effective of them.

Salt

If your pan is aluminum or stainless steel, then immediately after it has burned, fill it with cold water. Wait a bit, then add table salt without sparing. After 2-3 hours, you can safely remove excess with a simple sponge. If your dishes are enameled, then it is worth letting it cool before pouring salt. After the same time, the pan should be washed using hot water.

Boiling

Pour hot water into a metal pan and add one tablespoon of soda. Wait 40-45 minutes, turn on the heat and boil for about 10 minutes. After cooling, remove dirt in the usual way. For enameled dishes you will need a saline solution. To make it, take 5 tablespoons of salt per liter of water, boil for 40 minutes. Burnt remains will separate themselves from the bottom.

Activated carbon

This method is convenient in that it is suitable for pots of any material. He will be an indispensable assistant if your milk is burnt. To clean your container, you need to grind a few tablets of activated carbon and pour the resulting powder to the bottom. Let stand for 40 minutes, then add cold water and wait another 30 minutes.

Vinegar

The use of vinegar in cases of burning is particularly suitable for aluminum pots. It helps to get rid of both burnt food and blackness. Fill the pan with table vinegar, cover it with a lid and let it brew for about 2 hours. Then wash the dishes with any detergent.

Milk serum

This method is also perfect for any pan, regardless of material. The only negative is that you have to wait a long time. Pour the serum onto the contaminated area so that it is 2 centimeters higher. Set the pot aside for 24 hours, then pour out the liquid and wash with any suitable product.

Soda

If cooking has not been done well and not only the bottom of the dish, but also the outside, has become dirty, boiling the entire pan in a soda solution will help you out. Place the contaminated dishes in a larger pan, fill with a solution consisting of 500 grams of soda and 5 liters of water. Keep in mind that water should exceed the pan by about 2 centimeters. After boiling, make a minimum heat and simmer another 2 hours. When the pan has cooled, rinse in the standard way.

Soda-salt mixture

Enamel and aluminum pans can be cleaned by mixing soda and salt in equal proportions. Pour in enough water to form a thick slurry. Cover and wait 24 hours, then add water again, put on fire, wait for boiling and simmer for another 30 minutes over low heat. Allow to cool, proceed to washing with detergent.Do not use this mixture for stainless steel.

Soap

The scheme is as follows: pour any affected pan with hot water, add liquid soap, mix. Put on fire, boil for 20 minutes. Wait for it to cool, then rinse off the dirt with a sponge. The method will help only if the burning was weak, and not very pronounced.

Sour apples

This is a little-known method, but, as many experienced housewives believe, is quite effective. Sour apples are suitable exclusively for enameled pots. To bring it to its former state, for this it is necessary to boil the peel cut from sour apples in a saucepan.

Special tools

If all of the above methods are not suitable for you because of a long wait, use the store tools. Before using them, be sure to read the instructions, since each tool should be used for certain types of dishes.