Septic tank "Tver" - an overview of the characteristics, design and installation features

The problem of collecting household waste in country houses that are not connected to a centralized sewage system due to its elementary absence in a given area is solved by installing septic tanks. Very often, the installation of such structures is performed using concrete rings. The impressive weight of reinforced concrete structures complicates not only their transportation to the facility, but also the installation. You won’t be able to manage without a crane. In addition, septic tanks made of concrete rings cannot be installed near the house, and there may simply not be a suitable place further from the object. Therefore, an increasing number of consumers are choosing domestic autonomous systems for the treatment, storage and disposal of domestic wastes, made from modern synthetic materials in the factory. Tver septic tank differs from all similar models in the simplicity of design, which provides a high degree of purification of liquid household waste. Satisfies the owners of suburban real estate and the cost of this equipment, as well as the lack of need for its after-sales service.

To visualize the principle of operation of the Tver septic tank, watch this video.

Features of the device of this treatment plant

In a capacious container, divided by several internal partitions, a multistage process for cleaning household waste occurs. These tanks are made of their polypropylene, which is a strong but light material.

Since the final weight of the structure is insignificant, special equipment is not required for its delivery to the place. And unloading can be carried out manually by several workers.

If you look inside the treatment plant of this type, you can find:

• septic chamber;
• bioreactor in a separate section;
• two sedimentation tanks;
• two aeration tanks.

The compressor, which is responsible for pumping oxygen in water, is installed in the house in the utility room. Such placement of equipment affects the increase in its life. Air diffusion in aeration tanks goes through aerators - special devices located at the bottom of each aeration tank. A layer of expanded clay placed at the bottom of these sections has a beneficial effect on the intensity of the flow of bioprocesses.

Installation of a septic tank Tver is possible in places with a high level of groundwater

In sedimentation tanks, large fractions of impurities sediment and are destroyed as a result of the active life of anaerobic microorganisms. In addition, the last compartment provides for the disinfection of water using chlorine-containing reagents placed in a special float.

Ruff nozzles that delay difficultly soluble substances contribute to their rapid cleavage.

What are the advantages of the Tver septic tank over similar structures?

• In places with a high level of groundwater, the installation of the Tver septic tank allows you to successfully organize the reception and processing of sewer drains.
• The horizontal type of placement of the structure reduces the amount of earthwork, simplifying not only the installation of the septic tank, but also its further maintenance.
• The treatment plant does not stop its operation during a temporary power outage.
• The design implements an independent flow mode of operation, which allows for the natural drainage of treated water by gravity under a slight slope in any area.
• The presence of a sufficient number of internal struts and external reinforced belts has a positive effect on the strength of the body and the preservation of its integrity under any operating conditions.
• The lack of electrical equipment inside the septic tank ensures the safety of using an autonomous treatment plant.

How is this bio-treatment station installed?

You can do it yourself with your own hands, without the involvement of specialists from specialized companies, if you wish. All work is carried out in the following order:

• first, a trench is dug, the dimensions of which should be larger than the dimensions of the tank by 30 cm;
• at the bottom of the dug trench, a 30-cm layer of sand is poured, which serves as a kind of "pillow" for the tank;
• the septic tank itself is installed;
• Further, the treatment plant is sprinkled with sand on all sides;

thermal insulation materials are laid on top, and the installation site is covered with soil.

Installation of a septic tank Tver is carried out in a prepared trench on a sand pillow, the space around the tank is also filled with sand

What affects the choice of model?

Consumers are offered several models of Tver septic tanks, designed for a different number of people, as well as differing in overall dimensions and performance. Before choosing a specific model, it is necessary to calculate the amount of domestic waste per day. For 1-3 people, the Tver-0.75P installation is suitable, which can process 750 liters of effluent per day. For a large country house, the Tver-2P modification is suitable, with a capacity of 2000 liters per day. Such a structure is designed to serve 8-10 people living permanently in the house.

By purchasing a septic tank for the summer residence of Tver, or for a country house, you will for a long time decide the question of the device of autonomous sewage on the site. Calling professionals will speed up the work and eliminate the likelihood of making mistakes during the installation of equipment.