7 ways to replace expensive household cleaning products in the bathroom
There are a lot of tools for cleaning, washing, stain removal in stores. However, their composition sometimes inspires greater concern than rust or plaque in the bathroom. Replace expensive chemistry is quite affordable for proven and affordable means that are in every home.
Hydrogen peroxide
A simple and cheap tool - hydrogen peroxide - is effective against mold. You can use it to clean a variety of places: walls, tiles, furniture corners, etc. Traditionally used 3% solution.
The surface covered with molds is previously mechanically cleaned. If the lesion is small, and the mold has appeared recently, you can simply wipe it with an alcohol cloth. Otherwise, cleaning with a wire brush will be required.
After treatment, peroxide is applied to the affected area through a spray. Necessarily processed and the area around the spot.
The composition is aged on the surface for a quarter of an hour, and then washed off with water. The procedure must be repeated several times.
Vinegar
Vinegar flawlessly copes with scale, grease, dirty drips on the toilet, perfectly cleans surfaces and gives them shine. With it, you can return to its former appearance and functionality of the shower head, covered with limescale. To do this, place the watering can in a bag of vinegar and leave for an hour. Then just rinse the nozzle with water.
Lemon
Lemon juice perfectly fights dirt, effectively removes old stains and rust and is an excellent flavoring agent.
In the bathroom, lemon will help restore the cleanliness of a very dirty sink. It is enough to sprinkle a slice of lemon with salt, rub the surface and rinse with water.
Also, lemon will help clean taps from plaque. All that is needed is to rub them with a slice of citrus, and after five minutes, remove the remaining juice with a damp cloth.
For the same purpose, grapefruit can also be used.
Soda
Soda is indispensable for cleaning porcelain, glass and silver surfaces. With its help, you can cope with the old pollution in the seams of tiles in the bathroom. To do this, the tile must first be moistened, and then the seams should be treated with a brush and powder. If the dirt cannot be cleaned, then the effect of soda can be enhanced: spray table vinegar on the seams. By reacting with soda, it will help to solve the problem.
To remove clogging in the pipes, it is recommended to pour half a glass of soda into the sink or bathtub drain hole and add as much vinegar. After half an hour, the pipes should be washed with hot water.
Oil
You can even use oil when cleaning the bathroom. For example, olive can help clean stainless steel pipes from plaque. It is enough to apply oil on them, and then polish the surface with a paper towel. Chrome steel pipes are recommended to be rubbed with a cloth dipped in baby oil.
Dentifrice
Tooth powder in the bathroom is useful not only for brushing your teeth, but also for cleaning the tiles.To do this, the powder is diluted with water to the density of sour cream. The resulting paste is applied to the walls, left to dry, and then cleaned with a soft dry cloth. The result is a clean surface without plaque, dirt and soap stains.
All smooth and shiny surfaces in the bathroom can be cleaned with a mixture of two tablespoons of tooth powder and a teaspoon of ammonia.
Soap
Laundry soap perfectly removes yellowness from the surface of the bath. It is enough to rub the sponge with soap, treat the surface and rinse with water after an hour. In addition to cleanliness, the soap returns surface gloss.
