How to drain water from a water heater and in which case it is necessary to do?

How to drain water from a water heater and in which case it is necessary to do?

In private houses, in summer cottages, as well as in apartments, storage water heaters are installed to ensure hot water supply. In apartments, such equipment is used only during the period when the hot water supply is turned off, which happens regularly in the summer and is connected with the seasonal repair of communications. In houses that are not connected to the centralized hot water supply system, water heaters are used constantly. At the same time, depending on the properties of the cold water entering the device for heating, the term of its serviceable life depends. In order to extend the period of operation of the product, it is necessary to clean the walls of the tank and heating elements from deposits once every two years. Before starting work, you have to empty the tank from water. The professionals who install the device know how to drain the water from the water heater correctly and quickly. Those who are faced with such a problem for the first time have to delve into the details. After watching the video, for many of you, the process of draining water from a hot water heater will become simple and straightforward.

Any novice master can repeat the operation shown in this video consultation on their own.

Algorithm for organizing work to drain water

  1. Before you begin, do not forget to unplug the heater from the outlet.
  2. Allow time for the water in the tank to cool to a safe temperature. This will avoid possible burns when draining the water.
  3. Then turn off the cold water supply to the appliance.
  4. Then you need to open the hot water valve on the mixer or turn the lever to the appropriate position in order to relieve pressure inside the storage tank. Allow all water to drain from the pipe.
  5. Then open the faucet located on the hot water pipe to allow air to enter the tank.
  6. Now it remains only to open the drain valve, located on the cold water pipe going to the water heater, and by connecting the drain hose, drain all the water into the sewer.
  7. Make sure that the water is fully out of the tank.

Important! Remember that the heater must not be plugged into an outlet with an empty tank. This can not only damage the device, but also cause a fire.

Water drain from the water heater

There is a special drain valve with which you can drain water without any problems

In what cases do you need to drain the water?

In what cases, in addition to cleaning the tank and heating elements from scale, is it necessary to drain the water from the water heater without fail?

This question is relevant for those who use this equipment irregularly. In country houses, country houses, not used for year-round use, the water is drained from the water heater if the room temperature can drop to + 5 ° C and less than degrees. In this case, there is a danger of freezing of liquid in the tank and pipes, which will provoke their rupture.

Important! If the temperature in the house is above + 5 ° C, it is better not to touch the heater.Manufacturers of water heaters do not recommend draining water and leaving appliances for a long time without water. Indeed, in this case, processes that negatively affect the condition of the materials used to make the storage tank proceed faster.

How to drain water when equipment breaks down?

If the heater breaks down, the issue of draining the water is resolved unambiguously. However, it is impossible to carry out it yourself in any case, if the device is still under warranty. In this case, you must contact the company where the equipment was purchased, as well as those who were involved in its installation. To avoid a double responsibility, it is better to buy the device and order its installation from the same company.

Water drain from the water heater

For repair or scheduled cleaning of the water heater, it is better to call the specialists who carried out the installation of the device

Warranty equipment is being repaired at the installation site. Therefore, representatives of the seller company will inspect the water heater, determine the breakdown and take action to eliminate it.

If for this it will be necessary to dismantle the heater, then the masters themselves will pour water from it.

After the warranty expires, you can try to repair the water heater on your own, after draining the water from it according to the algorithm indicated above. However, professionals will definitely cope with this task faster by completing all the work in accordance with the requirements of the manufacturers.

 

 

6 comments

    Sort:

    Ascending
    1. AvatarIrina

      Good day. We have supplied a water heater AquaLine. In operation 5 years, never cleaned. The water from the well is cold normal, but hot oily has become. Maybe someone faced this and can tell how they fought?

      1. AvatarAngelina

        Irina, good afternoon! I have the same problem, electrolux water heater. It is impossible to wash your hair - as if it becomes even fatter after washing. Yesterday I just realized that it was not a matter of water, but of a dirty boiler. Tell me, please, what helped you in the end? Washed? Thank!

    2. AvatarIlya

      Greetings! A water heater of the same series as in the picture at the bottom of the article. There is a great desire to remove scale, because in the village there is specific water and I feel that the water heater will soon grunt for this reason. Duck, according to the documentation with the water heater that was going on, there is a magical entrance for a decalcifier which, judging by an incomprehensible picture, should still be somewhere somewhere. The search led to a hole plugged with a very soft plastic plug, but specifically fitted. I gave up my brains and realized that it couldn’t be so simple, because there is pressure inside this shaitan of the machine ... then a little more I started to think. If you cut off the supply of cold water, and try to put the anti-scale in the hose and then screw everything in place and cut in the cold water - in principle, the anti-scale should get in and all the rules, right? Any instructions on this? Thank you in advance.

    3. AvatarSergei

      I re-read the article several times and added to bookmarks, it will come in handy. This summer we bought a new water heater, and the old one must be put somewhere, but first of all, remove, and there is water. That was the problem. So and so I tried to pour water out of it, in the end it turned out, but not according to the algorithm presented in the article. As a result, after he was taken away and connected in another place, he stopped working. They could not identify the cause themselves, they had to call the master, pay him money for the old, but needed, water heater. After the repair I began to work, I think I’ll still serve a couple of years, and there you look and buy a new one.

    4. AvatarAlexandr

      Thank you very much, I wondered whether to drain the water or not in the apartment, now I will know.

    5. AvatarDenis

      Everyone needs such a good educational program on water heaters, thanks to the author. For the first time on our own, my father and I poured water, we can say, by touch. They read the instructions, but there is somehow little understood. So they were tormented. And since the water heater we plowed for about five years and have never been cleaned, when we removed it, we almost torn our bellies from gravity. It can be seen that it accumulated precipitation well :) It’s now leaking again, I think that definitely for discharge, the water needs to be drained again. Just do not understand about the drain tap on the pipe with cold water, what kind of tap? Is this a check valve which? And what to do with the valve, do not touch it? Thanks if you answer.

We recommend reading:

How to fix a do-it-yourself shower hose