The device and operation of the Termex water heater

The Termex water heater (Thermex) for more than half a century is an example of functionality and high quality characteristics. The manufacturer's specialization is represented by the release of exclusively modern water heating equipment. Ten years ago, products under the Italian brand began to be manufactured in our country.

Range of water heaters Termeks

Features of Termeks vertical, horizontal and floor water heaters are very high reliability indicators and European design. The development of the entire model range is carried out by specialists of the scientific laboratory, and the use of many electrical elements of our own production has a positive effect on the operating life and makes it easy to choose the most suitable version of the device.

Horizontal

ERS 80 H Silverheat is designed for 1.5 kW, 80 liter capacity, with wall mount and glass-porcelain, enamelled inner tank coating. The maximum water heating temperature is 74 ° C.

Water heats up in a tank in 170 minutes

ESS 50 H Silverheat with a volume of 50, with a power of 1.5 kW, is mounted on the wall. The appliance is heated at 74 ° C.

The heater has a glass-porcelain, enamel inner coating of the tank

IF 50 H has a heating power of 2.0 kW, a capacity of 50 l, wall mount, without an inner tank cover. It can heat up to 75 ° C.

Tank coating made of stainless steel

Flat Diamond touch ID 80 H is a wall-mounted model with a power rating of 2.0 kW and a volume of 80 liters. Heats up to 75 ° C.

Model without tank lining

Vertical

ERS 50 V with heating of 1.5 kW, tank capacity of 50 l, wall fixation and enamel, glass-porcelain inner coating of the tank.

The device is equipped with a magnesium anode.

ER 300 V is designed for 6.0 kW, with a tank volume of 300 l, with installation on the wall.

The model has a mechanical control type

H 10 O PRO with a heating power of 1.5 kW, a 10 l tank, wall mounting and an inner coating of a tank of enamel and glass porcelain.

The device is mounted above the sink

IF 50 V has a power of 2.0 kW, holds 50 l, is mounted on the wall, without an internal coating of the tank and with a self-cleaning system.

The device has electronic control

Floor

Champion ER 200V - model of accumulative type, with power indicators of 6.0 kW, bottom connection and pressure type of water supply. The maximum heating temperature is 75 ° C. Hydraulic control Volume - 200 liters.

The model has a glass-ceramic inner coating of the tank

Combi ER 200V device with an internal glass-ceramic coating, maximum temperature heating of water 75 ° C, bottom connection and power level 6.0 kW.The model has a safety valve and pressure water supply.

Video: Thermex ERS 150 V Silverheat device review

Owner reviews

We bought Thermex Champion ER 100V. Its advantages: reasonable price, reliability. We have been using the heater for almost 2 years. The duration of continuous operation reached 2 months, it also warms up quickly, there were no incidents with leaking and repairing electrics. The device is easy to use; it resembles a regular thermal sweat in functionality. Disadvantages: a short cord (only 1 meter), decent power consumption. With constant use for a month, it winds around 180-200 kW of excess, more expensive than for hot water.

We have been using the Thermex IF 50 V water heater for 2 years. Advantages: good volume, 50l, safe, compact and nice design. The apartment has a lot of space, so there were no special problems with the placement. Parents have a small toilet, placed neatly over the toilet. Like a digital display, it is convenient to control the temperature level, easy to control.

I bought a Thermex Flat Plus IF 50H heater. Housing and communal services did not see a big difference between the consumption of hot water and electricity in the utility bill, so I safely used it. Convenient display function - you know what is happening. I liked the possibility of accelerated heating.

Thermex IF 80 V 80 L we chose by chance. The ratio of price, volume of 80 liters and an unusual flat shape is the best option for our bathroom. Heats up quickly, there are different heating modes - slow and fast. Convenient backlit menu - always shows the temperature.

About a year ago I bought a Thermex IF-30V electric water heater. The control panel is modest but neat. There is an RCD that disconnects the device from electricity when there is a leak or circuit. A safety valve is also present. But a significant drawback of this model is that the water heats up for quite some time, but ends quickly. If you are not in a hurry, then you really will not have time to wash yourself.

Tank Thermex Silverheat ER 80 V we bought 3.5 years ago. The device heats up completely (up to 70 degrees) in three to four hours. We used it daily. There is a temperature sensor on top. Bribed that the tank uses bio-glass-porcelain, as well as the Silverheat system, which prevents the formation of bacteria and scale inside the tank. But recently, the heater began to leak, the master said that the device rusted from the inside and these models do not last more than 3-4 years.

Device and operation

An open-type heating element heats water much faster

The main components of Termex hot water equipment:

• body of the hot water device;
• exhaust pipe for hot water supply;
• cold water inlet;
• drain valve;
• safety valve device;
• safety valve handle;
• exhaust pipe of the safety valve device;
• drainage system, drainage to the sewer;
• eyeliner system;
• cold water valve;
• hot water valve;
• main cold water system;
• main system of hot water;
• shutoff valves of cold water;
• shut-off valves of hot water;
• protective cover;
• Control Panel;
• discharge pipe.

How to include and a brief instruction for use

The instructions for use of Termex water heating equipment clearly indicate not only safety measures, but also service rules:

• cold water is supplied to the EVN using a filter for preliminary treatment at a level of 200 microns or more;
• the safety valve is installed to supply cold water to ensure complete tightness of the joints with sealing materials in the form of flax or FUM tape;
• during operation of the water-heating equipment, leakage of water through the exhaust pipe of the safety valve may be observed, which is explained by the release of excessive pressure for the safety of the device;
• the exhaust pipe of the safety valves must be installed in a downward direction and constantly kept open;
• It is strictly forbidden to operate any type of water-heating equipment without installing a safety valve;
• it is mandatory to drain from the outlet of the safety valve to the sewer system;
• in a monthly mode, an insignificant volume of water is drained by means of a pipe run into the sewer system, which will effectively remove lime deposits and controls the operability of the valve device;
• during operation of the water-heating equipment, the valve opening handle must block the drainage of water from the storage tank;
• the equipment is connected to the water supply system using copper, plastic pipes or using flexible special plumbing;
• after connecting the hot water device, you need to make sure that the cold water shutoff valves are open and the hot water valve is closed;
• to ensure air outflow, a tap is opened for cold water supply, the outlet of hot water supply with a power supply and at the mixer;
• after closing the hot water tap on the mixer, it is necessary to check the flange and make sure there are no leaks, and if necessary, tighten the bolts;
• Before connecting the water-heating equipment to the power supply, make sure that the parameters fully comply with the technical characteristics of the boiler, as well as the presence of water in the tank of the device;
• water-heating equipment is provided by grounding.

An electrical outlet dedicated to connecting hot water equipment must be provided with a ground contact in accordance with IPX4 or higher.

Common errors and malfunctions

For the most common hot water equipment of the THERMEX CHAMPION and THERMEX CHAMPION SLIM series, ER 50 V / H, ER 80 V / H, ER 100 V / H, ER 120 V / H, ER 150 V / H, ES 30 V / H, ES models 40 V / H, ES 50 V / H, ES 60 V / H, ES 65 V / H, ES 70 V / H and ES 80 V / H are characterized by possible errors and malfunctions presented in the table.

Table: malfunctions and errors in the operation of the device

The most common errors with definition codes:

• E1 - insufficient filling of the tank and premature inclusion;
• E2 - problems with the temperature sensor;
• E3 - heating water to critical temperature indicators.

In most cases, it is recommended that you contact the service center to troubleshoot the boiler.

The main advantages of Thermex brand electric water heating equipment include the high quality of the materials used, a large model range and numerous service centers located throughout Russia. Nevertheless, some consumers are distrustful of the Russian assembly of units, are dissatisfied with the too high cost, as well as the lack of models of flat boilers with a mechanical type of control or with the presence of a built-in “dry” heating element.