Typhoon Pumps: Overview of Specifications and Customer Reviews

Typhoon Pumps: Overview of Specifications and Customer Reviews

The very first thing a homeowner should take care of is the source of the water. It doesn’t matter if this is a new plot on which it is planned to build a house, or if it is a long-lived yard, the source of water supply should be. Each solves this problem in his own way: he connects to the central water conduit, digs a well, and clogs a well. In the last two cases, a normal water supply cannot do without a water pump. The choice of these products on the market is extensive, but more specifically, in recent years, the consumer has been voting for the Typhoon pump in rubles.

Where is typhoon commonly used?

Typhoon pumps are designed for autonomous water supply of individual households. They are highly efficient and able to provide enough water for the creation and full operation of an independent water supply system. These pumps can be used to supply water, both from wells and from wells.

Note! Moreover, if we consider the Typhoon well pump, then a well diameter of at least 125 mm is a prerequisite for its proper operation.

Key pump specifications

Typhoon pump with winding protection

Modification with built-in overheat protection

  • Water column height up to 90 m.
  • Pressure - 9 Bar;
  • The maximum productivity is 2.5 thousand l / h.
  • Water intake - 2-valve system.
  • The operating mode is continuous.

When choosing, you need to pay attention to the fact that the pump for the Typhoon well can be made in one of two modifications, which differ in the type of thermal protection:

  • BV-0.25-40-U5-M
  • BV-0.5-16-U5-M (recommended if the voltage in the network changes many times in the range of 180-250 Volts).

Thus, the Typhoon vibration pump is characterized by a winding with built-in protection, which ensures automatic shutdown of the unit during overheating, as well as with insufficient water in the well or well. Thanks to the presence of two valves, the water supplied to the top further cools the pump winding. Such a design, according to the manufacturer, will allow efficient operation of the unit for 10 years.

Attention! If the sediment is part of an autonomous water supply system, it is recommended to use it together with a hydraulic accumulator (capacity up to 600 l).

What is included in the factory package?

  • Pump
  • Protective ring
  • Coupling for connecting a размером size hose or 25 mm diameter plastic pipe
  • Nylon cord

The principle of operation in the water supply system

Factory Equipment Typhoon Pump

The pump can be used to pump clean and dirty water.

The submersible pump Typhoon begins its work by injecting water into the accumulator, which ensures a pressure of 3 atm. When this indicator is reached, the pump shuts off automatically.If there is a flow of water and the pressure in the accumulator decreases, then upon reaching the level of 1.8 atm., The pump will also automatically start working on pumping water to the required volume.

Note! The minimum immersion depth of the Typhoon pump is 1 m, and the maximum 5 m.

Vibration Pump Operation Reviews

Should I buy a Typhoon pump? Of course, everyone who faces the choice of such equipment asks a similar question. Technical specifications voiced by the manufacturer and dealers, in fact, are not the answer to it, since this is a dry statement of facts. More understandable information can be obtained from the reviews that consumers leave on the Internet.

We conducted our monitoring of numerous forums where people discuss the operational features of such equipment. Based on what real consumers write, we can make an unambiguous conclusion: you can buy a Typhoon pump without fear. With proper operation and maintenance, it will serve reliably both for autonomous use and in complex water supply systems of private households, summer cottages and even farms.

Important! Both those who extract water from a well and those who use water from a well respond equally positively about it. When discussing the merits, all consumers without exception speak positively about the presence of a built-in protection relay, and consider a high starting current as a defect.

In conclusion, we suggest that you familiarize yourself with the information video clip from an authorized dealer.

 

 

15 comments

    Sort:

    Ascending
    1. AvatarAlexander

      Brothers in misfortune! After 3 months, too, I cut off the stem with vibration. The reason is not that steel grade. I found the rod from the shock absorber and turned it on the machine - eternal.

    2. AvatarVictor

      Similarly. I didn’t work and cut the stock for three weeks, so we are looking for where to buy it. Bottom line: do not buy - look for more expensive and more reliable. Not enough brains to read reviews before buying. And he took it at the bazaar without a guarantee.

      1. AvatarIgor

        Nonsense is complete, not a pump - it worked for 3 days for 2 hours and cut the stock in 2 places. DO NOT BUY!

        1. AvatarNikolay

          ))) cut the rod in 2 places - anyway, the suspension cable broke in 2 places, or the bolt was cut in 2 places, or tear the thread with your hands - and it breaks in 2 places ... Have you come up with this?

    3. AvatarVladimir

      The same story - worked for three weeks ... sorry for the money, spoiled nerves in sorting out relations with the store. I’ll have to take it to the service, I don’t know if it will change right away, but the impression is disgusting, it seems - our manufacturers' hands obviously do not grow from there ... With the simplicity of the design there’s nothing to break, but no - you still have to manage! No words, just nerves.

We recommend reading:

How to fix a do-it-yourself shower hose